Washing machine Parts
|
|
Agitator
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) Complete with Fabric Softener Dispenser as shown at the top of the picture opposite.
The paddles on these agitators can break off which reduces the washing capability of your machine. The item can be replaced by removing the dispenser at the top & putting your arm down the center to turn a large plastic coated wing nut by hand. Both the fabric softener dispenser & the agitator have been fully cleaned. This item will not be shipped outside New Zealand due to it's size. |
Drain Pump
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) Suitable for all F & P Smart drive Top-loader Washing Machines.
|
Inner Bowl Hangers
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) Suitable for all Fisher & Paykel Smart drive & Intuitive Top-loader Washing Machines. Each rod assembly includes rod, spring, spring cover, both end caps and corner mount
This is for a complete set of all 4 support rods. |
Water Control Valves
|
All prices, including shipping, are in New Zealand Dollars (NZD) Water valve Inlet 12V Hot and Cold for Smart Drive washing machines.
The water outlet is out through the bottom of this assembly. This is for the complete assembly as shown in the picture. |
Water Control Valves
|
All prices, including shipping, are in New Zealand Dollars (NZD) Water valve Inlet 12V Hot and Cold for Smart Drive washing machines.
The water outlet is out through the left side of this assembly. This is for the complete assembly as shown in the picture. |
Balance Switch Assembly
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is the balance switch assembly, the white plastic arm hangs down at the back right of the bowl. If the bowl is out of balance when it spins then it will hit the arm which activates the switch at the top & stops the machine.
Make sure your machine is installed level before replacing this assembly. |
Balance Switch Assembly Yellow Type
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is the balance switch assembly, the white plastic arm hangs down at the back right of the bowl. If the bowl is out of balance when it spins then it will hit the arm which activates the switch at the top & stops the machine.
Make sure your machine is installed level before replacing this assembly. |
If you like our site then please click on the Facebook or Google + icons at the top right of this page, thank you.
For more information you can email us or preferably use our new forum page.