Fishing Kontiki Parts For Sale
|
|
It's not always easy to find all the parts that you need for this project so I'm going to start adding a few bits and pieces to this page as and when I come across them.
Bilge Pump for Kontiki Project $95.00
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is a brand new 2000 Gallons Per Hour pump
12 volt, 6 amp It is an ideal size for the kontiki project. |
Reducer for Kontiki Project
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is a brand new 100-150 reducer (Reducer level invert SCJ DWV 123.150.100). It's proper use is for storm water but it is perfect for the kontiki project.
|
Screw Cap End For Kontiki Project
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is a brand new cap screw & base DWV 136.150. It comes complete with the O ring & is normally meant for storm water but although it is expensive it is also perfect for the kontiki project & fits snugly on the larger end of the reducer above.
|
12v Battery For Kontiki Project
|
All prices, including shipping, are in New Zealand Dollars (NZD) These rechargeable batteries are 12 volt, valve regulated, sealed lead acid, 36 watts per cell with 6 cells.
I use these batteries for all my projects including the kontiki winch & also the new segway project. |
90mm Pipe For Kontiki Project
|
All prices, including shipping, are in New Zealand Dollars (NZD) Ends cut square and cut to 70mm length, this 90mm pipe is an ideal fit for the bilge pump. This pipe was originally designed for storm water.
|
100mm pipe For Kontiki Project
|
All prices, including shipping, are in New Zealand Dollars (NZD) Ends cut square and cut to 800mm length, this pipe forms the main body of the kontiki. This pipe was originally designed for storm water. (SOE DWV SC SN6 100mm 200SN6.100.6.SOE)
This item can only be shipped within NZ. |
Four Pipe clips 100mm For Kontiki Project $36
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is for all 4 pipe clips for the kontiki project, they enable the main thrust pipe, the flag and the small buoyancy tube to be mounted. See picture at top of this page.
These pipes are 100mm clips that are designed to fit the main 100mm body of the kontiki. |
Two 40mm End caps $18
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is for two 40mm end caps for either end of the buoyancy tube shown in a pic at the top of this page.
|
100-90mm reducer $15
 Click to enlarge
|
All prices, including shipping, are in New Zealand Dollars (NZD) This is the reducer at the tip of the kontiki, it reduces the main 100mm body down to 90mm.
|
If you like our site then please click on the Facebook or Google + icons at the top right of this page, thank you.
For more information you can email us or preferably use our new forum page.